+91 91488 711109 AM – 6 PM, all days Order now

Home & garden

Biochar for gardens: what it is and how to use it

Biochar is charcoal made for soil. Used properly it can improve drainage, water retention and soil life for years. Used wrongly it can stunt plants for a season. Here is how to get it right.

3 min read · Updated 14 November 2026 · By the Charcoals team, Bengaluru

This guide builds on our page about charcoal powder for plants, going deeper into how biochar works and how to use it in pots, terraces and garden beds.

What is biochar?

Biochar is charcoal intended to be added to soil rather than burnt. It is made the same way as cooking charcoal: wood or other plant material is heated with very little oxygen, so instead of burning to ash it turns into a stable, porous carbon skeleton. The idea is ancient. The famously fertile terra preta, or dark earth, of the Amazon was created by people adding charcoal, pottery and waste to the soil over centuries.

Biochar is not a fertiliser. It contains very few nutrients itself. What it does is change the soil's structure: its sponge-like pores hold water and nutrients and give beneficial microbes somewhere to live.

What biochar does for soil

  • Holds water. In sandy or fast-draining soil and in terrace pots that dry out in the Bangalore summer, biochar helps the soil hold moisture longer.
  • Improves drainage and air. In heavy clay soils it opens up the structure so roots can breathe.
  • Holds on to nutrients. Charged biochar holds nutrients near the roots instead of letting them wash away with every watering.
  • Supports soil life. The pores give fungi and bacteria a protected home.
  • Lasts a very long time. Unlike compost, which breaks down in a season or two, biochar stays in the soil for decades or longer. It is also one way of locking carbon away in the ground.

Results vary with soil type. The biggest improvements are usually seen in poor, sandy or depleted soils, and the smallest in already rich, healthy soil.

The most important step: charge it first

Fresh charcoal is like a dry sponge. Put it straight into soil and for the first weeks it can soak up water and nutrients that your plants need, and plants may look pale and slow. The solution is to charge (or inoculate) the biochar before use, so its pores are already full of nutrients and microbes.

  1. Crush it. Break the charcoal into pieces between rice-grain and pea size (about 2 to 10 mm). A mix of sizes with some powder is fine. Wet it first to keep dust down, and wear a mask.
  2. Soak or mix it with nutrients. Choose one method:
    • Mix it into your compost heap at about 1 part charcoal to 5 to 10 parts compost and leave for at least 2 weeks.
    • Soak it in compost tea, diluted jeevamrutha, cow dung slurry or a diluted liquid fertiliser for 1 to 2 weeks, stirring occasionally.
    • Soak it in diluted urine (1 part to 10 parts water) for a week. It is free, very rich in nitrogen, and a traditional method.
  3. Drain and use. Charged biochar is ready to mix into soil.

How much biochar to use

WhereHow muchHow
Potting mix for pots and grow bags5–10% of the mix by volumeAbout 1 cup of biochar per 10 cups of potting mix
Kitchen garden or flower bedsAbout 1–2 kg per square metreDig or fork into the top 15 cm of soil
Planting trees and shrubsA few handfuls per planting holeMix into the backfill soil
LawnsA thin layer of fine biocharSpread with compost as a top dressing
Orchids, succulents and terrariums10–20% of the mixUse chunkier pieces to improve drainage

More is not better. Above about 10 to 20% in pots, the benefits level off and the mix can become too free-draining. Start small and add more over the years.

Other ways gardeners use charcoal

  • Dust cut stems and roots. A light dusting of fine charcoal powder on cuttings, root divisions or a cut on a succulent helps dry the wound and is a long-standing nursery practice to discourage rot.
  • Drainage layer in terrariums and closed bottle gardens, to keep the water at the bottom from going stale.
  • In compost, to cut down smells. See charcoal in compost and pest control.

Mistakes to avoid

  • Using it raw. Always charge it first.
  • Using briquettes or BBQ leftovers with lighter fluid. Briquettes may contain binders and fillers, and charcoal soaked in kerosene or lighter fluid should never go into soil. Use only plain, additive-free lump charcoal or purpose-made biochar.
  • Confusing charcoal with ash. Ash is the white powder left after charcoal burns completely. It is alkaline and behaves very differently in soil.
  • Breathing the dust. Wet the charcoal before crushing and wear a mask.

Frequently asked questions

Is charcoal good for plants?

Plain, additive-free charcoal that has been charged with nutrients improves soil structure, water retention and microbial life. Raw, uncharged charcoal can temporarily hold back nutrients from plants.

What is the difference between biochar and charcoal?

They are made the same way. Biochar is simply charcoal intended for soil, usually crushed small and made at temperatures that suit soil use. Plain hardwood lump charcoal can be crushed and used as biochar.

How long does biochar last in soil?

Biochar is very stable and can stay in soil for decades to centuries, which is why you only need to add it once in a while.

Can I put BBQ charcoal in my garden?

Plain lump charcoal, yes, once crushed and charged. Do not use briquettes, self-lighting charcoal or anything that was lit with kerosene or lighter fluid.

Need charcoal or cooking wood?

Hardwood, coconut shell and BBQ charcoal, plus pizza, biryani and pooja wood. Same-day delivery in Bangalore, courier across India.

WhatsApp
Call Order on WhatsApp